> For the complete documentation index, see [llms.txt](https://docs.smithii.io/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.smithii.io/products/tools/ethereum/stockereum-bundler.md).

# Bundler, Bundle Buy and Bundle Sell on Stockereum (Ethereum)

Launch a token on Stockereum, paired with ETH, a tokenized stock or another asset, with an atomic dev buy and up to 20 sniper wallets, and buy or sell from many wallets at once, on Ethereum.

The Stockereum Bundler launches a token on Stockereum, the Ethereum launchpad that opens a permanent Uniswap V4 market against an asset you choose. It runs an atomic dev buy and up to 20 sniper wallets that buy in the first block without the opening surcharge. It is for creators who want to launch a token paired with a tokenized stock, with ETH or with another asset. Stockereum also has **Bundle Buy** and **Bundle Sell** to trade an existing Stockereum token from many wallets at once.

The common EVM flow is described in [Bundler, Bundle Buy and Bundle Sell on EVM chains](https://docs.smithii.io/products/tools/ethereum/bundler.md). This page covers what changes on Stockereum.

## Open the tool

[Open the Stockereum Bundler on Ethereum](https://tools.smithii.io/stockereum-bundler/ethereum). [Open Stockereum Bundle Buy](https://tools.smithii.io/stockereum-bundle-buy/ethereum) and [Open Stockereum Bundle Sell](https://tools.smithii.io/stockereum-bundle-sell/ethereum).

## Why it is different

|                          | Other EVM launchpads                              | Stockereum                                                                                    |
| ------------------------ | ------------------------------------------------- | --------------------------------------------------------------------------------------------- |
| Market                   | Bonding curve or pool, depending on the launchpad | **A permanent Uniswap V4 pool** with a hook, from the first block. No curve and no graduation |
| Pair asset               | Usually the native coin                           | A catalog of **hundreds of assets** (ETH, USDC, memecoins and tokenized stocks)               |
| Supply and opening price | Varies                                            | **1,000,000,000** tokens, opening at a fixed fully diluted valuation (FDV) set by Stockereum  |
| How snipers wait         | They retry as soon as the launch confirms         | They **wait about 24 seconds** for the first block without surcharge and fire **once**        |
| Smithii fee              | After the launch                                  | **Before the launch**, only if a pre-simulation passes                                        |

## How it works

1. **Connect the creator wallet** on Ethereum. It pays the fee, makes the dev buy and becomes the token creator.
2. **Token details:** name (up to 32 characters), ticker (up to 12), description (up to 500), image and optional links. The image cannot exceed **512 KB** (the exact limit of Stockereum's upload service); the page uploads it to Stockereum.
3. **Pair asset:** a drop-down with Stockereum's official catalog. See Pair asset below.
4. **Pool trading fee:** 1%, 2% or 3%.
5. **"Reward token holders" (optional).** See below.
6. **Dev buy (optional):** in ETH. Only with pairs that have an official route to ETH.
7. **Snipers (optional):** up to 20 wallets with their key and amount in ETH, only with pairs that have an official route to ETH. There is no Priority sniping or manual start option.
8. **Click "Launch on Stockereum"** and approve in your wallet.

**Internal order:** checks balances (dev buy + Smithii fee + Stockereum fee + gas) → gets a **signed price** for the pair asset → **simulates the launch** → charges the Smithii fee → launches (with the atomic dev buy, if any) → runs the snipers. If the simulation fails, nothing is charged. If the launch fails after the fee is charged, the message says so and **there is no automatic refund**.

## Features and options

### Pair asset

* **The catalog** is read from Stockereum itself and changes over time. It includes ETH, USDC, memecoins and other crypto, and a large number of tokenized stocks.
* **You can launch against any of them**, but only pairs with an **official route from ETH to the pair** allow a dev buy and snipers. They are a minority of the catalog. The others show as "no dev-buy" in the drop-down: if you pick one, the dev buy and snipers are disabled and cleared.
* The token opens at a fixed FDV calculated with the **signed price** Stockereum gives for the pair asset at that moment (with a deadline). If the price expires or cannot be fetched, the launch is not sent.

### Trading fee and holders

* **Trading fee:** 1%, 2% or 3%. It is set when the pool is created.
* **Reward token holders:** if you turn it on, the share of the fees that would go to the creator is shared among eligible holders instead of going to the creator wallet. It is set at creation.

### Opening anti-sniper surcharge

* **What it is:** the hook charges **every buy** (except the creator's atomic dev buy) a fee that **starts at 99% and drops linearly to the pool fee over 20 seconds**.
* **What the bundler does:** snipers **do not buy during the window**. They wait, measuring time **with the chain's clock** (not your computer's), until the first block without surcharge. On Ethereum, with 12-second blocks, that is about **24 seconds** after launch.
* **All sniper wallets fire together** to land in that same block. Each one **sends once**: there are no retries, because a retry while the first transaction is still pending could buy twice.
* **Minimum price:** each wallet gets a minimum output that **holds even if the others buy first**, with a 20% margin. Small amounts that cannot be quoted are dropped with the reason "Buy amount too small to quote".
* **Gas reserve per wallet:** 0.002 ETH. If a balance does not cover buy + gas, that wallet does not buy and says so.
* **Result per wallet:** bought, did not buy and why (invalid key, repeated wallet, no amount, simulation failed, insufficient balance, reverted), or "not confirmed yet; check the transaction before buying again".

### Bundle Buy on Stockereum

* Paste the token and the wallets ("key,amount" from 0.0001 to 100 ETH; up to 25). The connected wallet only pays the fee.
* **Before charging:** the tool checks that the token comes from the official factory, that the pair has an official route from ETH, and **waits for the 20-second surcharge to pass** (measured with the chain's clock). Each wallet is simulated with a quote. Wallets that fail are dropped; if none passes, nothing is charged.
* **Then:** it charges the fee and buys **one wallet at a time** (not in parallel), **requoting right before each send** (20% margin) so each buy sees the price left by the previous ones.
* Duplicates (same key on two rows) are dropped; only the first counts.
* A buy that does not confirm in time is marked **pending**: check the explorer before repeating it.

### Bundle Sell on Stockereum

* Sells a percentage (25, 50, 75, 100 or 1 to 100) of each pasted wallet's balance and receives **ETH** through the official router.
* **Only available if the market's pair has an official route back to ETH.** If not, it is rejected before charging.
* Before charging, the tool checks that the token is a Stockereum token and that a sell quote returns a positive amount.
* Sells **one wallet at a time** with a fresh quote and a 20% margin.
* Each wallet selling for the first time sends an exact token approval.

### After the launch: token panel

Same as the other EVM bundlers: balances, cost, estimated profit, sell per wallet and "Dump all". Sales go through the official router and pay out in ETH. The Smithii sell fee is half the launch fee (0.004 ETH), charged when the dev bag is sold.

## Limits

| Item                                      | Limit                                                |
| ----------------------------------------- | ---------------------------------------------------- |
| Sniper wallets                            | 20 (only with pairs that have an official ETH route) |
| Wallets per Bundle Buy or Bundle Sell run | 25                                                   |
| Amount per wallet in Bundle Buy           | 0.0001 to 100 ETH                                    |
| Image size                                | 512 KB                                               |
| Name / ticker / description               | 32 / 12 / 500 characters                             |
| Pool trading fee                          | 1%, 2% or 3%                                         |
| Gas reserve per sniper                    | 0.002 ETH                                            |

## Fees

| Action                  | Amount                                         | Charged by              |
| ----------------------- | ---------------------------------------------- | ----------------------- |
| Launch (Bundler)        | **0.008 ETH**                                  | Smithii                 |
| Bundle Buy              | **0.008 ETH** per run                          | Smithii                 |
| Bundle Sell             | **0.004 ETH** per run                          | Smithii                 |
| Panel sale              | **0.004 ETH**                                  | Smithii                 |
| Stockereum creation fee | 0.001 ETH (included in the launch transaction) | Stockereum, not Smithii |

There is no fee per sniper. The Smithii fee is a simple ETH transfer.

Network gas is paid separately. Fees were checked on 2026-10-26 and can change: the tool shows the exact amount before you sign.

## Good to know

{% hint style="warning" %}
**The Smithii fee is charged before the launch on Stockereum.** If the launch fails after the fee is charged, there is no automatic refund.
{% endhint %}

* **The 99% surcharge is real:** a buy outside the bundler in the first 20 seconds pays much more. That is why the bundler's snipers wait.
* **A sniper that does not confirm is not retried.** It may still have landed: check the explorer.
* **Tokenized stocks** are ERC-20 tokens with their own risks; Smithii does not issue or back them. A token launched against them depends on the signed price Stockereum provides.
* **Pasting private keys** into a browser is sensitive: use dedicated wallets.

## FAQ

### Is there a bonding curve?

No. The token starts in a permanent Uniswap V4 pool against the chosen asset.

### Why do my snipers take about 24 seconds?

Because they wait for the first block without the anti-sniper surcharge (99% dropping over 20 seconds).

### Which assets can I use as a pair?

Any asset in Stockereum's catalog. Only those with an official route from ETH allow a dev buy and snipers.

### How much does it cost?

0.008 ETH from Smithii and 0.001 ETH from Stockereum per launch, plus the dev buy and gas.

### Is the dev buy atomic?

Yes, it goes inside the transaction that creates the token.

## Related

* [Bundler, Bundle Buy and Bundle Sell](https://docs.smithii.io/products/tools/compare/bundler.md)
* [Bundler, Bundle Buy and Bundle Sell on EVM chains](https://docs.smithii.io/products/tools/ethereum/bundler.md)
* [Token Creator on EVM chains](https://docs.smithii.io/products/tools/ethereum/token-creator.md)
* Blog: [How to Create a meme coin on Ethereum](https://smithii.io/en/create-and-launch-ethereum-memecoin/)
