Liquidity Pool on NEAR
Create a TOKEN/NEAR pool on Rhea (formerly Ref Finance) for your NEP-141 token in one wallet request, then add or remove liquidity.
If you created a NEP-141 token on NEAR (with Smithii or not), it needs a pool before anyone can buy and sell it. Smithii's Liquidity Pool Creator does in one go every step that Rhea (formerly Ref Finance) requires by hand: register your account and the token on Rhea, convert NEAR into wNEAR (wrapped NEAR, the asset Rhea pairs tokens with), deposit both sides, create the pool and add the first liquidity. Afterwards, the Liquidity Adder and Liquidity Remover let you add or withdraw liquidity.
All pools in these tools are TOKEN/NEAR (your token against wNEAR). You cannot pair with USDC or another token.
Open the tool
How it works
Create a pool (Liquidity Pool Creator)
Connect a NEAR wallet.
Choose your token from the ones in your wallet. The selector shows up to the first 50 tokens with a balance. wNEAR cannot be the base token (Rhea does not allow a pool of wNEAR against itself).
Enter how many tokens and how much NEAR go into the pool. The NEAR side has "50%" and "MAX" shortcuts. "MAX" already deducts the fee, storage and gas reserve, so it does not offer your full balance.
Check the Launch Price shown under the amounts (NEAR per token).
Click Create Liquidity Pool. The Smithii fee, the pool creation, the deposits and the first liquidity are sent in a single wallet request, so you sign once (your wallet may show several transactions inside that request).
When it finishes, the "Pool Created" receipt shows the pool number, a link to the transaction on NearBlocks and the pool ID to copy.
Before charging anything, the tool checks:
That you have enough of the token and enough NEAR for liquidity, fee, storage and gas. If not, it shows how much you need and tells you nothing was charged.
If the token was made with Smithii: that it is not paused, that your wallet is not blacklisted, and that the anti-whale (per-transaction or per-wallet limit) will not reject the transfer to Rhea. If anti-whale is active and Rhea is not exempt, the tool stops and asks you to exempt it from Token Manager or wait until the limit ends. Without this check, the token would reject the deposit after the fee was paid.
That no TOKEN/NEAR pool with liquidity already exists for that token. If one does, the tool does not create another: it shows "This token already has a pool" with the pool number and sends you to Add Liquidity.
Special cases:
An empty pool already exists. If there is a TOKEN/NEAR pool with no liquidity (for example, one you created in an attempt that failed at the last step), the tool reuses it instead of creating a duplicate.
A step is left halfway. As soon as the pool exists, its number is saved in your browser. The button changes to "Resume: Add Liquidity", no second fee is charged, and the liquidity is added to that same pool. A "Start over with another token" button discards the pending step; the pool stays created on Rhea and the fee you paid stays as credit for your next pool.
Pool ID taken. The first liquidity targets the pool number Rhea will assign next. If someone else creates a pool at that moment and takes that number, the liquidity is not added (no harm done) and the tool adds it to the right pool in a second request.
Opening price
There is no "price" field. The opening price is the ratio of what you deposit: NEAR deposited divided by tokens deposited. It is a constant product pool with both sides at 50% in value, so that first ratio sets the price the market starts at.
Example: 1,000,000 tokens and 100 NEAR give a starting price of 0.0001 NEAR per token. The starting market cap is that price multiplied by the token's total supply.
Depositing very little NEAR against many tokens gives a very low price and a pool that small buys can move easily.
After creation, the market moves the price. You cannot "fix" it except by withdrawing and depositing again at another ratio (paying the tool fees again).
Pool fee
The pool is created with a 0.3% fee per trade (30 basis points), set by the tool; you cannot change it. On 2026-10-26, Rhea's contract kept 20% of that fee for the protocol, so the rest, about 0.24% of volume, goes to liquidity providers. The exact split is Rhea's decision and can change.
What you receive
You receive pool shares on Rhea ("LP shares"), not a token that appears in your wallet. They stay in your Rhea account and represent your part of the pool and of the accumulated fees. They are your only claim on that liquidity: whoever holds them can withdraw it.
Smithii does not hold custody of anything: tokens and NEAR go from your wallet to Rhea, and the shares stay in your account.
On NEAR there is no Smithii tool to lock or burn those shares, and the Rug Check on NEAR does not measure LP locks. While you hold the shares, you can withdraw the liquidity whenever you want, and any informed buyer will know it.
On the remove screen, shares are shown in "LP" units (Rhea measures shares with 24 decimals).
Add liquidity (Liquidity Adder)
Connect your wallet and paste the pool ID (for example 8829,
#8829orrefv1-8829) or the token account. With the token account, the tool lists its TOKEN/NEAR pools (up to 10, deepest first) and lets you choose if there are several.Enter one side (tokens or NEAR) and the other is calculated from the pool's current ratio. In a pool with no liquidity there is no ratio: you enter both sides and set the price, as when creating.
"50%" and "MAX" calculate the largest pair your balance can cover, already deducting fee, storage and gas from the NEAR side.
Click add. The fee and the liquidity go in a single wallet request.
If the pool's token has taxes or transfer fees, the tool calculates what Rhea actually receives (the net amount) and adds that, not the gross amount.
Remove liquidity (Liquidity Remover)
Connect your wallet and paste the pool ID or the token account. Only pools where your account holds shares are listed.
Enter the percentage of your shares to withdraw (0 to 100), or use "50%" or "MAX" (100%).
The screen shows an estimate of what you will receive: the tokens plus the NEAR. If the token charges fees on transfer, it shows the net amount and warns you that you will receive less.
Click remove. The fee, the withdrawal from the pool and the transfer of both sides to your wallet go in a single request. wNEAR comes back already converted to regular NEAR.
Protection: the withdrawal sets a minimum of 80% of your share at current reserves (20% tolerance). If the pool moves more than that, the operation fails instead of paying you less.
If the withdrawal runs but one of the transfers to your wallet fails, the missing part stays in your Rhea balance, and you withdraw it on app.rhea.finance, the same as leftovers when adding. Before charging, the tool also checks that the token (if it was made with Smithii) is not paused and has no anti-whale that would stop Rhea from sending it to you.
Features and options
Tokens with transfer fees
Smithii tokens with tax, burn on transfer or reflection charge when they move. The tool always uses the net amount Rhea receives or sends.
Resume without paying twice
If the fee was already paid and a step failed, the next attempt does not charge it again. That credit is saved in the browser of that wallet: it does not travel to another browser or device.
Listing on Rhea and DexScreener
Rhea and DexScreener only list the pool once there are trades. The pool exists and can be traded from the first moment (the receipt links straight to the pool page on Rhea), but it can take time to show up in listings.
Simple pools only
Add and Remove recognize simple TOKEN/wNEAR pools on Rhea. They do not manage concentrated liquidity (DCL) pools.
Fees
Smithii fee, in NEAR. Each action is charged separately.
Create a pool and add the first liquidity (Liquidity Pool Creator)
4.62 NEAR
Add liquidity (Liquidity Adder)
4.62 NEAR
Remove liquidity (Liquidity Remover)
4.62 NEAR
Network gas is paid separately. Fees were checked on 2026-10-26 and can change: the tool shows the exact amount before you sign.
Other amounts that are not Smithii fees and that you need to hold in NEAR:
The liquidity you deposit (the NEAR on the quote side).
Rhea storage deposits: up to 0.01 NEAR for a new Rhea account, up to 0.01 NEAR for the pool creation and up to 0.01 NEAR to register your shares. Real use is about 0.005 NEAR for the pool and about 0.0008 NEAR for the shares; the unused part of those two deposits comes back.
Registration of wNEAR (0.00125 NEAR) and of the token on Rhea (the minimum storage the token requires) when missing.
When calculating "MAX", the tool reserves all of the above plus the fee and the gas reserve your wallet requires upfront (unused gas is returned).
Good to know
The opening price is your deposit ratio. Check it before you sign.
The shares are the liquidity. Whoever holds them can withdraw it. Smithii does not offer an LP lock on NEAR, so there is no Smithii function to prove to the market that you will not withdraw.
Anti-whale or pause on a token can block the deposit or the withdrawal. The tool detects it before charging on Smithii tokens; on third-party tokens it cannot read those rules.
The fee is not refunded, it is reused. If something fails after the charge, the credit is saved in your browser for the next attempt. If you switch browsers, it is not there.
One pool per token in these tools. If a pool with liquidity already exists, no other is created.
Leftovers on Rhea. After adding liquidity, check your internal balance on app.rhea.finance.
Everything is verifiable on NearBlocks: each step is a public transaction.
FAQ
Why doesn't my pool appear on Rhea or DexScreener?
They list pools once there are trades. Your pool already exists and can be traded; the receipt links to it directly.
How do I choose my token's price?
With the ratio of what you deposit: NEAR divided by tokens.
What do I receive when I create the pool?
Pool shares in your Rhea account, not a token in your wallet.
I added liquidity and some was left over. Where is it?
In your internal Rhea balance. Withdraw it on app.rhea.finance.
Will I be charged again if something fails?
No. The fee you already paid is reused, in the same browser.
Can I pair my token with a coin other than NEAR?
No, only TOKEN/NEAR.
Can I lock my liquidity on NEAR?
Not with Smithii. There is no tool to lock or burn Rhea shares on NEAR.